Two-roll shredders are fitted with toothed disc cutters, attached to the shaft. Two shafts rotating in opposite directions capture the raw material and crush it. Cutters of two-roll shredders are made of high-alloy hardened steel that allows crushing abrasive raw material with «critical» content of mineral and metallic impurities, without any consequences. Worn cutters are subject to recovery so you do not need to buy new cutters.
Feeding hopper and other assemblies that require their removal for maintenance are quick release. This allows for inspection, lubrication and minor repairs in a short time.
The shredder includes a control station, which program provides overload protection, reverse when rolls are blocked.
The fraction obtained by grinding may be calibrated in size from 10 to 100 mm. This shredder is equipped with a grid-calibrator.
|Hopper charging opening
|Number of rolls
|Number of movable cutters on one roll
|Number of movable cutters on two rolls
|Number of immovable cutters on one roll
|Number of immovable cutters on two rolls
|Number of cutting teeth on a cutter
|Cutter disc diameter
|Fraction size at outlet
|On customer request from 20 to 100 mm
|Depends on processed material
Your application is accepted