our shop
WWW.PPI18.RU
on Russia for free
8 800 700-01-04
+7 (495) 961-56-48
Address
+7 (3412) 540-004
Perfect alternative to traditional reinforced concrete structures is a polymer-sand well, which is cheaper in installation, and its strength and tightness are of the competition.
Used on hydraulic press D2434 and above
Technical requirements by GOST 22082-76,
Steel 40..45 HRC by GOST 1050-98
Fitted with water-cooling system| Tech.Characteristics | Well ring | Well ring segment | Well cone | Well bottom | |
|---|---|---|---|---|---|
| 1 | Mold material | Steel 40Х, 45Х | |||
| 2 | Number of places in mold | 1 | |||
| 3 | Required press / model | D2434 and higher | |||
| 4 | Molding time, s | 600 | 600 | 600 | 600 |
| 5 | Product size, mm | Ø1090х200 | 560х340х100 | Ø1090х Ø740х200 | Ø1090х40 |
| 6 | Product weight, kg | 50 | 9 | 55 | 45 |
| 7 | Mold weight, kg | 2000 | 590 | 2300 | 1800 |
| 8 | Dimensions of mold (length, width, height), mm | Ø1160х600 | 680х470х440 | 1155х1155х600 | 1150х1150х550 |
Your application is accepted
